- #Install iperf2 unifi usg mac os
- #Install iperf2 unifi usg serial
- #Install iperf2 unifi usg manual
- #Install iperf2 unifi usg software
By default, the SFP1 port is set to DHCP Client. If an SFP module is plugged in, then the SFP port is active, and the corresponding WAN port is deactivated. SFP ports are hot-swappable and support 10/100/1000 fiber SFP modules.
By default, the WAN1 port is set to DHCP Client. A WAN port is active only if the corresponding SFP port is empty. RJ45 ports support 10/100/1000 Ethernet connections. By default, the LAN1 port is set to DHCP Server, and its IP address is 192.168.1.1/24. Then configure the following settings as needed:
#Install iperf2 unifi usg serial
Use an RJ45-to-DB9 serial console cable, also known as a rollover cable, to connect the Console port to your computer. RJ45 serial console port for Command Line Interface (CLI) management.
#Install iperf2 unifi usg software
UniFi Controller software v4.8 or higher (available at: ui.com/download/unifi ).Web Browser: Google Chrome (Other browsers may have limited functionality).Java Runtime Environment 1.6 (or above).
#Install iperf2 unifi usg mac os
Linux, Mac OS X, or Microsoft Windows 7/8/10. IMPORTANT: We strongly recommend using UPS backup and power regulation to prevent equipment damage due to stability issues with local AC power. Note: Although the cabling can be located outdoors, the UniFi Gateway itself should be housed inside a protective enclosure. For more details, visit: ui.com/toughcable We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For outdoor applications, shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the power supply. For indoor applications, use Category 5 (or above) UTP cabling approved for indoor use. Standard-sized, 19 ” wide rack with a minimum of 1U height available. This document is stored within the USG CIO Advisory Council Collaboration site. In addition to the resources listed on this page the USG Information Technology Services IT Disaster Recovery plan is available for reference. It also serves as a useful reference document for seasoned professionals at USG participant organizations who need to remain current with changes in Board of Regents policy and federal and state law. It is designed to provide new professionals within the USG the necessary information and tools to perform effectively. The IT Handbook sets forth procedures that each USG participant organization must follow to meet both Board of Regents policy mandates and the statutory or regulatory requirements of the state of Georgia and the federal government. The IT Handbook provides guidelines, best practices and recommendations to be followed by each USG institution. #Install iperf2 unifi usg manual
Usg Boral Partiwall Installation Manual. Below the string line.Bend each hanger wire to a 90-degree angle 3/4 in. Attach a hanger wire to each screw and cut 6 in. Intervals along the main-tee string lines. –18-gauge steel wire (residential instal- lation) or 12-gauge steel wire (commer- cial installation) – Screws to attach wall angles Metal snips to. – Lag Screws to attach wire hangers to wood joists every 4 ft. Measure the length of each wall at ceiling level. Use graph paper choose a convenient scale, such as one square per two feet. 12VDC, 1A Power Adapter (Included) Supported Voltage Range. Serial Console Port (1) RJ45 Serial Port: Data Ports (3) 10/100/1000 Ethernet Ports: Max.
0 kommentar(er)
